Saltar al contenido principal

El iPhone 5s de Apple fue anunciado el 10 de Septiembre, 2013. La reparación de este dispositivo es similar a los modelos anteriores y requiere destornilladores y herramientas de palanca. Disponible como GSM o CDMA /16, 32, o 64 GB / Plata, Oro, y Gris Espacial.

Preguntas 3530 Ver todo

Bottom of screen bulging out

After doing a screen replacement, this iPhone 5S screen does not want to go all the way down. If I align the things on the top to guide the screen, the top of the screen will go flat, but the bottom will not. There’s one dent but I do not think it has anything to do with the bulge. Please help

Block Image

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1

2 comentarios:

@booyahh - Can you please pick a different avatar for your user account the iFixit logo is reserved for iFixit employees. Thanks!

- de

Check the brackets for the pentalobe screws are not bent. If not it should snap in flush with a bit of pressure.

- de

Agregar un comentario

1 Respuesta


As you can see near the power button its is bent and thus the top corner is not sitting correctly. When it is not flush it cause the whole screen to not sit in the housing.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Luk estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 94