Saltar al contenido principal

iMac Intel 27 "EMC 2309 (Finales de 2009, Core 2 Duo 3.06 o 3.33 GHz) ID iMac10,1, EMC 2374 (Finales de 2009, Core i5 2.66 GHz o Core i7 2.8 GHz) ID iMac11,1

Preguntas 467 Ver todo

no boot at all

hello again!

I have an imac 27 late 2009,

I have change the logic board and the power supply…the leds on logic board are ok all 4 open.

and I have set an new ssd and I ‘m trying to install the mac os from the originals dvd but it stucks when trying to boot from dvd. the apple logo appers and then stucks ..

nothing works..

I can only boot with command and s on single user ..

please help!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
3 comentarios

Can you give us the make and model of your new SSD drive.

- de

The SSD is Samsung Evo 840 500Gb and I also bought the adapter NEWERTECH ADAPTADRIVE 2.5 TO 3.5 DRIVE CONVERTER BRACKET MAC/PC

I have checked everything but nothing happens..

When I remove the adapter and set only the SSD I can boot with command r and trying to install Mac is with original dvds but the installations fails..

- de

And when I m trying to boot from USB nothing happens no commands works and only I can see the flashing question marks on screen...

- de

Agregar un comentario

1 Respuesta

Respuesta Más Útil

First see if it will boot with the old drive before trying to upgrade it.

You will also need a backward compatible the SATA II 3 GHz SSD drive

Fue útil esta respuesta?

Puntuación 1

1 comentario:

The old hdd.... No working stuck on apple logo and the progress bar... Even if I reset the rams

- de

Agregar un comentario

Añadir tu respuesta

eirini estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 64