Repara tus cosas Comunidad Tienda

Procesador Core 2 Duo modelo A1225 / mediados de 2007 y principios de 2008 / 2.4, 2.8 o 3.06 GHz

Preguntas 433 Ver todo

Opciones

iMac dead no sign of life when power applied

I have an iMac that shows no sign of life. I an considering replacing the Power supply. Are there any guides on opening up the mac, ( I want to check the 4 diagnostic leds to confirm PSU dead ) and what replacement Power Supply would I need to order?. Does ifixit stock replacement PSU for this model, if not can anyone recommend where to get one ?.

I have attached a pic of the make and model of the mac.

Any and all help would be greatly appreciated as this would be my first time at a repair of this type

Regards Alec

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Here are the specs on your machine:

Apple iMac "Core 2 Duo" 2.4 24-Inch (Al) Specs

Identifiers: Mid-2007 - 24" - MA878LL - iMac7,1 - A1225 -  2134

Here’s where the diagnostic LEDs are located:

LED de diagnóstico del iMac Intel 24" EMC 2134 y 2211

UPDATE 9/5/19

Here’s a video guide on replacing the power supply on a 24” iMac:

https://www.youtube.com/watch?v=5YvPoMcS...

Apple part #(614-0405).

I see lots of people recommend the 661-4478

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

Hi Mayer.

Thank you very much for your help so far. I Have followed your guide removed the bezel and checked the diagnostic LED's. When AC power is applied NONE of the LED's light up. I am assuming the power supply is at fault.

Could you guide me in selecting a replacement PSU for my iMac. Does iFixit stock replacements or could you recommend an internet seller of compatible PSU

I very much appreciate your help

Alec

- de

Agregar un comentario

Opciones

I recently bought a iMac 2011 with the same issue. One thing that helped me is taking the plug out, waiting 10 seconds, pressing the power button for 10 seconds, waiting another 10 seconds, then plugging it back in, wait 10 seconds and turn it on. Now the fans spin and disk drive made a noise, so i know it’s working but no display so still yet to fix it properly. Maybe you might have more luck with that! Also i have heard a pvram reset helps. But it requires a usb keyboard.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Añadir tu respuesta

Alec estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 260