Saltar al contenido principal

Guías para la versión Wi-Fi del iPad Mini 3 (A1599). Anunciado el 16 de octubre de 2014, el iPad Mini 3 es el sucesor del iPad Mini Retina (ahora conocido como iPad mini 2).

Preguntas 61 Ver todo

Again: Digitizer Replacemtn / Home Button issues

Hi,

i replaced the Digitizer on my ipad mini 3 and am left with theTouchID issues and non-working Home-Button and Touchscreen.

I did not throw away the old Home-Button, but i did cut the Flex cable since i was not aware of the issue when i started changing the digitizer.

Is there any way i can repair the issue? Is there any way to get to the data stored on the ipad? I would not mind to much switching to another tablet, but i need the data on the ipad…

Best regards,

Tobias

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

you do not need the touch iD to work to get the iPad working again

Buy a new digitizer with a home button and fit it

Fue útil esta respuesta?

Puntuación 0

2 comentarios:

The Digitizer i currently have is a new one, because the old one was shattered.

I now got rid off the error i had previously being shown on the start screen (TouchID can not be activated on this iPad), but HomeButton and Touchscreen are still not working

- de

Just because it is new does not mean it is working>> You need to test it with one you know works

- de

Agregar un comentario

the connector on the motherboard are probably damaged and needs to be fixed. if you look closely on the golden pins can you se if any are bent or missing? They are quite fragile and removing the screen can easily rip them of

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Tobias Mueller estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 58