Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 1262 Ver todo

Home button stoppend working after opening screen

I’ve got an iPhone 7 with a cracked screen and wanted to replace it with a new one. After heating up the device and trying for several times, I finally opened the device, and left it that way (I don’t have the new screen yet). Today I picked up the phone, turned it on and noticed that the homebutton and touch ID weren’t working anymore. I have not touched the homebutton or flexcables in any way, as far as I know. Could it have stopped working due to the heat?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Baterías para ordenadores portátiles

Un pequeño arreglo para un gran resultado.

Comprar Ahora

Baterías para ordenadores portátiles

Un pequeño arreglo para un gran resultado.

Comprar Ahora

1 Respuesta

If you cracked the button with the heat, or accidentally nicked the cable, there is the possibility of you having broken it. Try reseating the home button connector, next try a new screen. At this point, it is already broken, so it can’t hurt to try. Apple is the only one that can fix the home buttons. Try reseating the screen cables too.

Fue útil esta respuesta?

Calificación 0

Comentarios:

No they dont need a new motherboard they just need to reprogramme the phone for another button pairing them up. Yes only apple can pair a new button but no it doesn't involve a new motherboard.

Other than that yes heat or damage to the flex is the cause also it might not be the button the button might have survived there could also be a possibility u damaged the flex on the screen instead and a replacement screen would fix that, so it's worth trying a new screen anyway.

Also if it's not too bad there are other people that may be able to look at the button for u and hopefully fix it.

por

Up until now I have tied reseating both the homebutton connector and the screen connectors, but without result. Also, both cables don’t seem to be nicked or damaged in any way, so if possible I really think the heat has damaged the homebutton. Lastly, I will try a new screen when I’ve received it.

por

How hot was the heat being outputted to the phone? Is this a hair dryer or a heatgun? If the home button area hasn't been touched I say the home button is fine because heat wasn't being directly blasted onto the ribbon cable of the home button itself.

Almost always it's just the screen ribbon cables going bad, a replacement screen will fix this problem if it's the case.

Had it happen once on an original screen after opening the phone, bad luck it seems.

por

I have received the new screen assembly, and the home button works agains! So apparently something in the old screen assembly connecting the homebutton broke due to the heat.

Now one more question: when I closed up the phone I noticed a screw sticking to the earpiece. It is a very weird looking screw and I have never seen it before. Where could this come from?

por

If it's not a part of the front camera assembly, I'd check the camera bracket and surrounding brackets. If it looks like a screw you've never seen before, could it possibly be a standoff screw?

por

Mostrar 2 comentarios más

Agregar un comentario

Añadir tu respuesta

Mick estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 40