Saltar al contenido principal

Sony ICFC1T alarm clock/radio is manufactured so that in the event of a power outage, you have the peace of mind that your device will continue working so you never miss an event.

Preguntas 24 Ver todo

Transformer issue with the device for Sony ICF-C1T

I had purchased Sony ICF-C1T from USA. I plugged it into 230V socket in India. It fried the transformer. I don’t have any clue of the specifications of the transformer, and where I can buy it. Can anyone please help me?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3
1 comentario

in usa many devices (like sony)is designed to use 120 volts AC Or 110 Volts AC

But In India, Their Voltage Is 230 Volts AC And it Will Fry The Transformer. But Sometimes You Need To Check The Voltage Selector If Its 120 Volts Or 220 Volts

- de

Agregar un comentario

3 Respuestas

Respuesta Más Útil

@greatpunit unlikely that this is an isolated transformer issue. My suspicion would be a blown rectifier etc. before the transformer. You do want to go ahead and disassemble your device and look at the power board. Check for burned looking components. Use these guides to work on it Sony ICF-C1T Screen Replacement and post some good pictures of your board with your question. Agregar imágenes a una pregunta existente

Imagen de iFixit

Guía

Agregar imágenes a una pregunta existente

Dificultad:

Muy fácil

2 - 5 minutes

Imagen de Sony ICF-C1T Screen

Guía

Sony ICF-C1T Screen Replacement

Dificultad:

Moderado

20 - 30 minutes

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Thank you for your prompt response. I had dismantled the complete device and I took out the transformer. I could see that the secondary of the transformer is not providing power. I will upload pictures of it.

- de

Agregar un comentario

Sony ICF C1 clock

Primary voltage is 230V and Secondary voltage is red - white 6.4 V AC and Yellow - blue 4.6V AC. Mostly primary winding will be burnt, because this clock is kept on continuous operation. You may rewind the primary winding with local winding technicians.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Block Image

Same issue seems like both transformer and board burned.

Block Image

Fue útil esta respuesta?

Puntuación 0

1 comentario:

Hi,

Can you post an image of the other side of the board. Nothing looks damaged on this side?

Did you measure the transformer with a DMM's (digital multimeter) Ohmmeter function to see if the primary and secondary windings are OK and not open circuit? Does the transformer or the board "smell" as though something has burned out?

- de

Agregar un comentario

Añadir tu respuesta

Punit Kelkar estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 14

Ultimos 30 días: 29

Todo El Tiempo: 1,145