Repara tus cosas Comunidad Tienda

Variante habilitada para LTE de la quinta generación de iPad, lanzada en marzo de 2017. Disponible con opciones de almacenamiento de 32 y 128 GB con una pantalla Retina de 9.7" y un procesador A9 de 64 bits.

Preguntas 46 Ver todo

Opciones

What to do with the digitizer flap when re-assembling

Block Image

Greetings,

My question is regarding step 31 of the iFixit front panel replacement:

Reemplazo del ensamblaje del panel frontal del iPad 5 LTE

And it appears that another person had a similar question at this point, with their question left unanswered.

Here’s my question:

The “hinge” part of the digitizer cables (the flap portion) looks like it is supposed to tuck into the crevice between the LCD panel and the side of the aluminum body - my replacement (from iFixit) has sticky contact on the upper side of this flap, making me think that its supposed to adhere to the side of the LCD panel, but the instructions do not make this clear - is my assumption correct?

I’ve attached a picture of the area in question.

Thank you for any response to my query.

Regards,

DLC

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

This is how the flex should be positioned prior to final assembly.

Block Image

Some suppliers fold it over and adhere it to the digitizer beforehand while others let you do it yourself. It’s hard to say from your picture as it is not clear enough. If you have to adhere it yourself, keep in mind that the flex (the portion with the connectors) has to do an inside-out for it to be positioned properly.

Also, check out this answer (After doing my repairs (battery and screen) I have problems) I provided earlier for some general “best practices” on iPad re-assembly.

Fue útil esta respuesta?

Sí No
Puntuación 4

1 comentario:

Hello Minho,

Thanks (again) for such invaluable information - I wound up adhering the flap to the underside of the digitizer-i noticed this was done on the original OEM front panel and I simply emulated the procedure - it only stayed completely in place once the iPad was completely assembled.

Thanks again,

DLC

- de

Agregar un comentario

Añadir tu respuesta

dlcatftwin estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 104