Saltar al contenido principal

Lanzado el 22 de septiembre de 2017. Modelo A1864, A1897. Disponible como GSM o CDMA / 64 o 256 GB / oro, plata y gris espacio.

Preguntas 678 Ver todo

The touch on my phone works, but no display shown.

My phone got water damaged but the indicator for it has not turned red (SIM card slot area). The phone responds to touch, the Buttons all work however there isn't any haptic feedback. When the phone is on, the alarm goes off and I can turn it off by pressing the screen. The charging port also still works.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

I suspect that the phone may only need a screen replacement. To confirm this the logic board would need to be removed from the phone to inspect both sides of the board for liquid damage.

Also remove the little black foam pieces that are covering around the connectors on the board as water can seep under those areas. There is also a black tape that is removable under the board which I also recommend removing to inspect for signs of liquid damage. If everything looks fine and no signs of water residue on the board then I would go ahead with a screen replacement.

Follow up to step 58 of this guide on how to remove the logic board:

Reemplazo del ensamblaje del conector Lightning en el iPhone 8 Plus

Reemplazo de la Pantalla del iPhone 8 Plus

iPhone 8 Plus Screen

Edit: As taptic is gone it is strongly recommended to have the board decontaminated as said by Owen Baker.

Imagen de iPhone 8 Plus Screen

Producto

iPhone 8 Plus Screen

$54.99

Imagen de iPhone 8 Plus Pantalla

Guía

Reemplazo de la Pantalla del iPhone 8 Plus

Dificultad:

Moderado

30 minutes - 2 hours

Imagen de iPhone 8 Plus Ensamblaje del conector Lightning

Guía

Reemplazo del ensamblaje del conector Lightning en el iPhone 8 Plus

Dificultad:

Moderado

40 minutes - 2 hours

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Respuesta Más Útil

The first thing you need to do is decontaminate the logic board with 91% isopropyl alcohol or else your phones lifespan will be decreased. Then you should try replacing the taptic engine. If replacing the Taptic Engine doesn’t work it’s a board level repair.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Hamza Zaman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 114