Saltar al contenido principal

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 1049 Ver todo

Phone cannot determine percentage/shutdowns(Changed the battery twice)

Block Image

I have replaced the battery in my iPhone SE with two new batteries, both unable to work out how much charge there is (sometimes stays at 1% and changes when I plug/unplug the charger) The first battery I used made the phone restart (even while charging) every 3 mins or so, the battery I’m currently using is staying around 58% and is telling me to service in battery health. Both batteries were from eBay and I’ve tried basic troubleshooting like a software reset, updates and checking that the connectors are pressed in properly.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Do a thorough visual inspection, preferably with magnification, of the area surrounding the battery connector. There are several tiny SMD components just above the connector. Of particular importance is FL2400, hghlighted in red. If it is missing (which can happen when you pry the connector off), then the battery state does not get communicated to the CPU and this can also cause charging issues and fluctuating readings.

Block Image

This can be repaired via a micro-soldering repair.

Fue útil esta respuesta?

Puntuación 4

1 comentario:

Thanks, I will open up the phone and take a look.

- de

Agregar un comentario

Añadir tu respuesta

Aaweso_me estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 65