Saltar al contenido principal

Guías de reparación y desmontaje para microondas Kenmore

Preguntas 182 Ver todo

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3
1 comentario

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

- de

Agregar un comentario

2 Respuestas

Solución Elegida

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

Fue útil esta respuesta?

Puntuación 1

1 comentario:

I have the same problem with my Kenmore microwave. Is this the part I need? https://www.searspartsdirect.com/product...

- de

Agregar un comentario
Respuesta Más Útil

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Ken Thome estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 1,034