Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Model A1288 / 8, 16, or 32 GB capacity

Preguntas 594 Ver todo

front panel digitizer removal

I purchased replacement battery kit and I am having difficulty removing the digitizer panel. The enclosed tools do not seem to be strong enough, it seems like the panel is glued. is that possible? and what can I do if that's the case?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Hey, this is a bit late, but if you take a look at step 6 from the tear down guide:

iPod Touch 2nd Generation Teardown

You can see that there a small metal "latches" by every screw. Sometimes these bend inward making it very difficult to remove the screen.

Using a spugder try to push this away from the screen and towards the edge of the iPod as if you where try to expand the casing, then try to lift up the screen.

I always start near the volume rocker.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

nordixnet estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 682