Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 2261 Ver todo

Why doesn't my home button and touch id work?

I’ve replaced my iPhone 7 battery with the ifixit repair kit. However after this repair my touch id and home button stopped working. I’ve already checked my connectors and ribbon cables on damage a couple times and I can’t find anything. I also checked my home button connector and cable itself on the lcd. However all of this doesn’t seem to fix the problem.

Also soft resetting the device is something I’ve tried so far.

Does anyone have a solution to this?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

If your home button was working before you changed the battery and you didn’t remove the home button from the screen the most likely explanation would be a really fine tear in the home button flex. It might be hard to see but if you could put it under a microscope I am sure it would reveal itself. I am not sure if iFixit supply the home button flex or not.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Check the circuit board components around the home button and battery connector. Sounds like you might of dislodged or knocked something off the board. Check for missing caps etc.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Dries Van de Velde estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 59