Rep: 23
2
Hello! I have an iPad Pro 9.7” and, after getting my replacement screen back off, discovered that there’s a bit on super glue on one of the Display Connectors and I was wondering if there’s any way to fix this. Thanks!
Es esta una buena pregunta?
Rep: 102.6mil
10
54
291
Can’t really see much from the picture but sure it can be fixed. If the superglue prevents the connector to be put correctly in place you can gently scrape it away with some fine tweezers and patience, it’s a tough glue but it’s stiff and it breaks into small crystals when correct pressure is applied. If there’s too much to be removed in a reasonable amount of time the connector can be replaced, but it’s a pretty challenging microsoldering repair and a pro is needed to fix it.
Fue útil esta respuesta?
I just applied a tiny amount of Acetone to the superglue. (making sure that it didn't touch the connectors) Hopefully that will soften the Glue, in turn making it easier to scrape away.
@jimmcl1951 Be careful with acetone as it may damage plastics without really softening the superglue, which is a bad beast. In my experience nothing really helps softening it..maybe it would help some cold to make it a bit more brittle.
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 1
Todo El Tiempo: 50
