Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

La revisión de 2016 de Apple a su línea de computadoras portátiles dirigida a usuarios profesionales. Cuenta con una pantalla Retina de 15 pulgadas, 2880 por 1800, Intel Core i7 de cuatro núcleos, opciones de almacenamiento de 256 GB / 512 GB / 1 TB / 2TB, 16 GB de RAM y un teclado equipado con una barra táctil. Lanzado en noviembre de 2016. Características del modelo A1707.

Preguntas 173 Ver todo

Will not display after screen replacement

I replaced the screen on a 2016 MacBook Pro with touchbar, after the screen was replaced when it boots up, it will not display to the screen, however will still display to an external monitor. I can get the screen to display on the laptop when I boot to an external drive sometimes, and I have tried another screen, and I get the same result. Installing the original screen solves all these issues and it works as normal. Any suggestions?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

Have you tried an NVRAM reset? https://support.apple.com/en-us/HT204063

- de

I've tired, and unfortunately had no luck

- de

Agregar un comentario

SALTEA LA ACTUALIZACIÓN

Ahorra reparando con un kit todo en uno.

Compra Kits de Reparación

SALTEA LA ACTUALIZACIÓN

Ahorra reparando con un kit todo en uno.

Compra Kits de Reparación

2 Respuestas

Respuesta Más Útil

@butch00772 I would return the display as its defective! The only other possibility is you damaged it in the process of installing it.

While these displays are very expensive they are quite easy to replace. The backlight cable is very sensitive in the newer 2016 & 2017 models as the cable is a bit short so it stresses at the connection point at the T-CON board.

Review these:

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

I’d see if there is a connection issue on the screen cable. The connection might be bad. In addition to this, you might be suffering from the "stage light” issues that were explored by iFixit. If that doesn’t work, try an NVRAM reset, and if it still doesn’t work, the problem is somewhere else.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

I've checked the connection, and it appears to be fine, I tried to update the MacBook, it was running High Sierra, and after the update to Mojave it displayed with no issue until the computer rebooted, and now it's having the same issue

- de

Agregar un comentario

Añadir tu respuesta

Butch Siragusa estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 33

Todo El Tiempo: 328