Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Lanzada el 3 de marzo de 2017, la Nintendo Switch es una consola de mano que se puede ver en la televisión o usarla tal cual.

Preguntas 334 Ver todo

Why isn't the solder melting?

I have a Nintendo switch that has a broken port I bought the tools and equipment for it and have set the temperature on my hot air rework station set to 350c but no luck and I even tried putting flux but still nothing, I don't know if I am giving it enough heat or I am missing something, I am a newbie when it comes to this stuff, any help would be greatly appreciated, thank you.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

I have the same issue but I was able to get it off but there is old solder left in the four holes and it is preventing the port from sitting flush

- de

Agregar un comentario

SALTEA LA ACTUALIZACIÓN

Ahorra reparando con un kit todo en uno.

Compra Kits de Reparación

SALTEA LA ACTUALIZACIÓN

Ahorra reparando con un kit todo en uno.

Compra Kits de Reparación

1 Respuesta

Solución Elegida

The Type-C port requires a lot of heat to remove. Have you added leaded solder on the charging port pins to lower the melting point of the solder?

Leaded solder has a lower melting point compared to non-leaded solder which will be what the components on the logic board are soldered with.

Check out this video for reference:

https://www.youtube.com/watch?v=Wfx3ShJC...

A board preheater (This helps a lot) is used along with a soldering iron and a hot air gun at the same time to remove the type-C port.

Fue útil esta respuesta?

Puntuación 4
Agregar un comentario

Añadir tu respuesta

Miguel estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 6

Ultimos 30 días: 32

Todo El Tiempo: 505