Recommendations for an SSD to replace old overheating HDD

Lets look at the question slightly differently here … What are the requirements the drive needs to work in this system.

To start with the size is smaller than the current drive 2.5” Vs 3.5” so thats not an issue (you’ll need an adapter frame which you already know). The SATA connection is the same so thats not an issue and you shouldn’t need any cable extensions. So far nothing special …

Now the fun one: The SATA I/O speed of your system is only SATA II (3.0 Gb/s) so what ever drive you get needs to support this I/O speed. Many of the newer drives are now fixed SATA III (6.0 Gb/s) speed and won’t work in your system so you need to be careful. As an example the Samsung 860 EVO supports all three data rates as you can see in the spec sheet here. Make sure the SSD you get states it, if not find another SSD.

The OWC Mercury Electra 3G SSD is the only SSD that you’ve listed thats spec lists 3.0 Gb/s.

Here’s the IFIXIT guide you’ll need to follow Reemplazo del disco duro del iMac Intel 20" EMC 2133 y 2210 Don’t forget to move the sensor over to your new drive at Step 19.