Saltar al contenido principal

Guías de reparación y soporte para lavadoras de la marca Whirlpool de carga frontal y superior.

Preguntas 422 Ver todo

How to fix Whirlpool top load washer out of ballance problem

Whirlpool /Maytag washer model MTW5840TW0 works great, except on the drain and spin cycle. The drum starts to spin and the water drains. Once all the water has drained the drum goes out of balance and hits the cabinet. What could be the problem? I’m thinking its the suspension springs, but just by visual inspection they are not broken or rusty.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3
1 comentario

This question was migrated from https://meta.ifixit.com/Answers.

- de

Agregar un comentario

2 Respuestas

Solución Elegida

There about 12 causes for this but it is usually a bearing. Here’s the list along with replacement parts:

https://www.repairclinic.com/RepairHelp/...

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

I have a whirlpool WTW7500GC2 washer that suddenly started vibrating more than usual. I have taken the top off all the suspension springs are intact and do not look damaged. I have purchased them, and will replace them anyway. Is there anything else it could be

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Phillp Saxton estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 36

Ultimos 30 días: 161

Todo El Tiempo: 9,109