Repara tus cosas Comunidad Tienda

Procesador Intel de doble núcleo modelo A1502 / 2.4, 2.6 o 2.8 GHz / Lanzado en octubre de 2013

Preguntas 552 Ver todo

Opciones

Greenish stuff on logic board

I have a MacBook Pro retina Late 2013

One day it refused to see the SSD, like an innocent I ordered an SSD for 300 CAD, I installed it and Na it did not see it.

I decided to go to Apple store. they kept it for a couple of days to tell me afterwards that it is a logic board issue and costs 10000 CAD :( you know.

I went on Internet and followed the instructions of a video on IFIXIT. I removed the Logic board and looked at it under a magnifier. Just behind the plug where the SSD sits, on the other side of the board I discovered a surface mount component that has leaked a greenish material and was obviously the problem to repair.

I copied the writing on it so I can buy it and install it (DDP 3X 8B) the surprise is no internet no electronic store no google knows what the hack is this component,

Does any one here know? It would be much appreciated. I can post pics if needed.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario

More likely you are seeing corrosion damage. Please take a tight picture of the area & one other that points to the area of the logic board Agregar imágenes a una pregunta existente

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

I think you are talking about this component

You canot find it under the name DDP 3X 8B because that’s not his name :(

on other motherboard is DDM 6D 4B

its the SLG4AP016V or on the schematics the U3740 and you can find it on Ebay

Block Image

Fue útil esta respuesta?

Sí No
Puntuación 2

7 comentarios:

@soros - The component might be OK here. Sounds more like corrosion damage which needs to be cleaned and a trace repaired.

Pictures will help here to decide whats needed.

- de

I think you are right @danj , most of the times is easily cleaned with alcohol and a little scrubbing with a needle

- de

@soros - I'm more into distilled water than alcohol as being more effective on water soluble stuff (sugars, coffee & tea solids), it also neutralizes acids and salts.

On green corrosion I use White Vinegar and Baking Soda made into a paste and place it on the area letting it sit for an hour or so, then I clean it off fully with distilled water, then I rinse with 85% isopropyl alcohol.

Alcohols & other solvents are also just not healthy to breath in all day long.

- de

Everyday I learn something

The white vinegar and baking soda you make yourself?

Thanks @danj

- de

@soros - You can't store it mixed as it looses its chemical reaction when it hits the copper salts (green stuff). I use a glass plate to mix the two, a teaspoon pile and an eye dropper to drip in the vinegar as I use a small dental spatula to mix it in.

- de

Mostrar 2 comentarios más

Agregar un comentario

Añadir tu respuesta

Ghassan Haddad estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 324