Saltar al contenido principal

Guías de reparación y desmontaje y soporte para la línea de cámaras digitales SLR de Canon, incluida la serie Eos.

Preguntas 748 Ver todo

My Canon EOS-1Ds Mark II won't turn on

I haven’t used my Canon EOS-1Ds Mark II for about 6 months. It was working perfectly before I put it away.

I put in a battery in the camera, it cannot be turned on.

It has different behaviors when I try to turn the camera on with different batteries.

  • Old Canon original battery (measured 12.6V) - the top screen flashing an empty battery.
  • Relatively new 3rd party battery (measured 13.4V) - nothing happened.
  • Canon DC Coupler with Adapter (measured 13.4V) - nothing happened.

Any ideas?

Thanks!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Respuesta Más Útil

Pull out the battery unit and on the top wall of the chamber is a small CR2025 battery which holds your settings. I would replace it.

Depending on how often you’ve recharged the battery packs they be worn out. What does the charging dock unit tell you the batteries condition?

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Thanks Dan,

I try with a new CR2025 battery but still do not work.

I know the condition of my NP-E3 battery is not good but the Canon DC Coupler with Adapter should be in a good working order.

The odd thing is that using a lower voltage battery (12.6V) the camera showed an empty battery, using a higher voltage battery (13.4V) or DC Coupler with Adapter (13.4V) the camera showed nothing.

- de

Agregar un comentario

How did you fix this? My camera has the same problem.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Hsu estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 14

Todo El Tiempo: 951