Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1687 / A1634. La Reparación de este dispositivo es similar a las generaciones anteriores, requiriendo destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16, 64 o 128 GB / Silver, Gold, Space Grey o Rose Gold.

Preguntas 1041 Ver todo

6S+ Camera not working after replacing it.

My 6s+ was plagued with the shaky tracking issue everyone else has. 

I bought a replacement and installed it. Now flash/led does not work and the camera is not recognized by any app. (Black screen). I reopened the phone and reinserted the OEM one… same issue. All connections are tight and everything is replaced as it should be.

I’ve reseated the ribbons 10 times (which each camera, old and new) and restored my phone to factory. No change. 


Did I damage the board? I’ve seen a ton of these questions asked but the answers are always “reboot the phone” “reseat the cables”. That’s not the answer here.

What’s my next move?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

1 comentario:

Unfortunately, it does sound like the board connections have been damaged in some way. Either replace the board, or upgrade your phone is probably your best option. If you already attempted a restore and it did nothing, thats probably the issue.

- de

Agregar un comentario

1 Respuesta

If reseting the cables didn’t work, I think the next step would be a new front assembly. Thats the proximity sensor, mic, speaker, and camera.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

tdog69697 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 41