Multiple Screen replacement issues

I have had the exact same issues, and it is because of the aftermarket screens they put on your phone. What happens is there is an IC attached to the screen flex cable, and when seated into the phone’s frame, it needs to be perfectly aligned between the top of the loud speaker and the bottom of the logic board inside the device. Usually aftermarket screens that do not have the proper dimensions are the screens that have this issue. Another way to check this is to lightly push on the middle of the screen while the phone is on and see where the “pressure waves” appear. If it appears at the bottom right of the phone screen, that is an IC fitting issue, but if it is around the home button, that could be something different. But overall, it seems that the issue has to do something with seating the screen properly. Do you have any “sponging” going on (press the bottom of the screen down lightly and watch the phone screen come back up a little bit imitating a sponge)?