Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Charging my iPhone causes No Service

So a few days ago, I started noticing that my iPhone would sometimes lose service randomly. I have tried everything from doing a fresh restore to Resetting all settings. I couldn’t figure it out. I noticed that every night when I wake up, that my iPhone had no service. The only thing that changed was that the iPhone was now charging. So I disconnected the power and a few minutes later, I have service again. I wanted to try and replicate the results so I plugged the power back into my iPhone and about 30 mintues later, I lost service.

Can I take apart my phone to try and fix the problem without ordering a replacement?

My goal is not to order a part (because I’m not entirely sure it’s the problem) until I try everything else. But I think it has to do something with the charging port.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Solución Elegida

It could be related to the charge port but realistically, this is a logic board issue. Searching/No Service issues on the iPhone 6 are usually related to the baseband and related RF IC’s. The baseband IC is very sensitive, just like the Touch IC's on the 6 Plus; it also suffers from poor quality traces and pads. The repair community sees tons of 6 series devices with various cellular issues and it’s rarely the antenna causing the problems.

A repair shop that does micro-soldering may be able to resolve your problem.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Some charging cables may cause issues with cellular service too. I have a 2m. long Mfi certified syncwire lightning cable that gives me troubles also with iphones 6s and 7 that give no troubles otherwise.

- de

Agregar un comentario

The No service is the common problem that happens now a days.First check the IMEI number from Dial pad by putting *#06# if not shown that is the issues of broken pin under Baseband chip on that cases you have to fix it by reballing Baseband chip with some micro jumper.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Jammy Sam estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 11

Ultimos 30 días: 41

Todo El Tiempo: 3,928