Rep: 11
1
2
Hi All!
My Bose Companion 2 Series II works, but the AC adapter connector needs to be bent with a finger right by the port on the speaker to work. I imagine it is a bad connection with the port. Is there a way to repair the port to not require my constant holding it in place?
Merry Christmas!
Thank you in advance!
Es esta una buena pregunta?
Rep: 448.9mil
11
366
1.4mil
Hi @picasso ,
It may be a loose connection or a faulty power socket.
Here’s a link to a not very good video that shows how to disassemble the speaker so that access to the interior components is possible.
Once you have access you can inspect the power socket connection to determine what the problem is, i.e. whether it is a loose connection or if the socket itself is faulty (you may have to use an Ohmmeter to prove this) and needs to be replaced.
Here’s a link to just one supplier of replacement sockets.
If the socket is the problem, as I do not know the specifications of the socket, you may have to search further for the correct type if the link doesn’t show the correct one. Be aware that these sockets are very close in diameter, being 2.1mm and 2.5mm, so this makes it awkward when trying to obtain the correct part.
Fue útil esta respuesta?
@jayeff Thank you! It seems to work fine if you put a pen between the power and audio cables. So far so good. Thank you again!
Ultimas 24 horas: 0
Ultimos 7 días: 4
Ultimos 30 días: 16
Todo El Tiempo: 1,801
