Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1500 Ver todo
Pregunta Cerrada

Soldering the LCD connector

Hi,

what temperature should i use to solder the pins on the LCD-connector (1). The former owner pulled a little bit to hard, now some of the pins are...lets say disconnected.

I use a WELLER EC 2002 with a very fine tip and i already looked for a new LCD. So why shouldn´t i try to solder it, its ruined anyway.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
1 comentario

If one of these answers fixed your problem please hit the "accept" in list that has "History Edit Flag Accept Comment" located to the upper right of your question so we can remove it from the unanswered list. Thanks.

- de

Agregar un comentario

3 Respuestas

Solución Elegida

I wanted to solder the connector back to the cable of the LCD. I've tried it with 320°C but that didn't worked. A day later the new LCD arrived so i didn't tried it anymore.

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

The temperature has to be above 320°C...just to get it off the unanswered list.

- de

thanks

- de

Agregar un comentario

I am not clear on what you are soldering. The connector that the LCD plugs into on the logic board?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

spam

Fue útil esta respuesta?

Puntuación 0

1 comentario:

all your answers are just links to a pay service...

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 4,466