Rep: 193
3
9
Hi all
I have stupidly damaged the home button flex on a Iphone 7 and now will not work, after a close inspection of the flex I can see under magnification the tiniest of cut on the flex just before the flex bends close to the FPC connector, so if I replace the whole part will it function as a normal home/return button but without the fingerprint ID scanner?.
Colin.
Es esta una buena pregunta?
Rep: 1.8mil
3
there are some people on ebay who claim to beable to repair the homebutton flex, a very tricky job!
Fue útil esta respuesta?
Rep: 635
6
6
1
if you replace the home button it wont work as a home button and touch id wont work. there is however a special charge port you can buy and install that will allow the home button function to work just not touch id. https://www.unionrepair.com/new-charging...
or you can bring it to apple for a screen repair and they will fix the home button in the process.
Fue útil esta respuesta?
Rep: 377
5
4
There is a new homebutton that you can use that has the click function (home) but touch id dosent work, dosent need to change the charging port to use the newest replacing homebutton, just replace the homebutton.
If you want touch id to work a part of the flex cable need to be changed (microsolder)
Fue útil esta respuesta?
Rep: 193
3
9
Sent it off and had a micro-solder job done on it last week so that the touch ID would work again, all good now!
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 5
Todo El Tiempo: 108
Sent it off and had a micro-solder job done on it last week so that the touch ID would work again, all good now!
- de colin