Repara tus cosas Comunidad Tienda

Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

Preguntas 426 Ver todo

Opciones

Lcd stays black once locked after replacement

Got the LCD replaced today and everything works fine till the screen either times out or gets locked.

after locking when I try to unlock the iPad the screen stays black but if I plug it into the tv with a hdmi adapter the screen shows up on tv and digitiser does work.

If I restart the iPad it works again till it locks.

running 12.1.1

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
1 comentario
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

What happens when you try holding the power button when it gets stuck on the black lit up screen? Does it show the slide to power off prompt?

Does the home button work at all on that digitizer? This points to a bad replacement digitizer where the smart cover sensor is faulty or missing on it.

Might need to cover the bottom digitizer border and home button cable with kapton tape so that the home button does not short with the digitizer or iPad housing.

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

Holding power button down has it function as normal you just can’t see anything. Home button works fine. It’s all original parts except for LCD.

Have been searching all afternoon and can not find anyone else with this problem.

- de

Agregar un comentario

Añadir tu respuesta

James Brannolte estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 104