Saltar al contenido principal

Modelo A1288 / 8, 16 o 32 GB de capacidad

Preguntas 451 Ver todo

putting the glass back on

how do i get the glass to stay on after replacing the digitizer?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Respuesta Más Útil

Hi bryant,

After pluging the digitizers cable in and wiping the lcd and inside of the digitizer, just place it down gently ontop and as long as all the clips are not bent then just slowly apply even pressure down upod the edges, keep doing this working your way along the edges and eventually you will start to here clicks, this is good. If however you apply to much pressure in one place and click that side in there is a chance that the screen will crack again (this happend to me). so nice even pressure. :)

hope this helps.

Mic

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Did it work well for you?

- de

Agregar un comentario

Añadir tu respuesta

bryant estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,012