Saltar al contenido principal

Lanzado el 19 de septiembre de 2014, este iPhone de pantalla de 5.5" es la versión más grande del iPhone 6.

Preguntas 1525 Ver todo

After Screen and battery Replacement the screen became unresponsive

Hi,

I got a serius problem with my iphone 6 Plus. After screen and battery replacement the screen became irreponsive. I can not touch any number to unlock the inital screen., they dont respond at all. It seems to be working fine but I can not access to the phone because i can not touch it.

What happened? Could be touch IC on the logic board problems? The phone was working fine before the replacement.

I replaced back the old screen and it does the same. The screen doesnt respond.

I really appreciate any help guys.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

What do think about this solution @refectio ? Could it work? https://www.youtube.com/watch?v=yUUfTzag...

- de

This is a kludge, not a fix...It only makes the root cause worse. Check out the blog post I linked below, it explains the issue in detail.

- de

Agregar un comentario

1 Respuesta

Solución Elegida

It’s most probably Touch Disease. This was probably a latent issue and torquing the device to do the repair was probably the proverbial “straw”.

If you want to know for certain, you would want to test your screens on a known-good device but this isn’t always practical for a DIY fixer. Double check the connectors on the logic board to insure you haven’t damaged them. If they are in good condition, then it’ll require a micro-soldering repair.

Fue útil esta respuesta?

Puntuación 4
Agregar un comentario

Añadir tu respuesta

Fernando estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 42