Rep: 1
1
I replaced my lightning connector yesterday with new part; everything seems to work except for the headphone jack. The phone recognizes that there’s a headphone plugged in, and the controls work, but no sound comes out.
Even the mic works, so not sure if it’s a bad part or if there’s a bad connections somewhere; any help would be greatly appreciated!
Es esta una buena pregunta?
Rep: 1
1
Solved; ended up being just a defective part; replaced with new component and everything works!
Fue útil esta respuesta?
Rep: 1.2mil
4
1
5
Make sure connection on board side is getting full contacts it will only take 1pin to stop headphones from working.
If after you are encountering the same problem i would swap back your old port temporarily not need to remove full flex just click it in and test headphones.
This will allow you to determine if you have a faulty item.
Fue útil esta respuesta?
Tried old connector as recommended. The old one works, but the new part doesn't. I'll request a replacement part from ifixit parts shop. Thanks!
That's great glad to see you worked it out
Rep: 278
7
1
Maybe check if you soldered it in right,you may of messed up and this is why it does not work.
Fue útil esta respuesta?
Rep: 1
4
Count the rings on the headphone plug, 3 rings? 4 rings? try different ‘rings’ headphones.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 2
Todo El Tiempo: 172
