Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Is connecting a screen to a (dried off) waterdamaged phone a bad idea?

I just finished rebuilding my iPhone with a new battery, charging port flex cable and housing.

The first two attempts at turning it on with a screen connected resulted in gray bars at the bottom of the display that continued getting stronger/brighter until it shut off. The third time the screen remained off but the phone seems to have booted, pressing the power button seems to turn on the backlight (can see edges glowing on bottom of display) but from the front the display appears to be off and does not display anything.

My primary question is: will I have to buy another display? Will connecting a screen to a water damaged, but dry, phone cause damage?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

It can cause damage, there may be liquid damage / corrosion under the metal shields on the logic board.

If this is the case you'll have to check by removing these metal shields but it requires a hot air rework station and some microsoldering experience do so as their welded to the board.

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

Añadir tu respuesta

Grayson estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 41