Repara tus cosas Comunidad Tienda

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2375 Ver todo

Opciones

Touch screen unresponsive after replacement.

I recently replaced my touchscreen on my iPhone 4 following the guide on here since it was dropped and the LCD was fubar. After it's been replaced the LCD works but the touch sensor doesn't work. Is there any reason for this to happen? There were no issues with the removal and installation of the new screen only a couple of the screws were a pain. This is a 16 GB black model.

Any thoughts?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

There can be several issues:

  1. Connector of the touch is not connected properly
  2. Damaged the touch screen during installation (tare the fragile cable apart or maybe installed some screws wrong which caused the cable to get damaged
  3. Screen is DOA

Good luck!

Fue útil esta respuesta?

Sí No
Puntuación 3

1 comentario:

Who needs luck with a fixed/broken iPhone?

- de

Agregar un comentario

Opciones

I already had this problem when disassembling the phone. In my case, I just cleaned (with alcohol) the digitalizer contact (both, the one at the PCB and the connector cable itself). After doin' it, I let the phone opened for a while to let the alcohol dry by complete. Touch sensor working fine since then.

As said before, don't forget to take a look at the screws positions. They just can't be mixed up, every screw has its right place.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Añadir tu respuesta

kal1982 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 10,613