During diagnostic test, C;03 worked then tripped breaker shutting machine off before going to C;04, is telling us it is the MCU, did not here the motor turn on at all thinking not the motor. Actually when plugged in this am the drum did spin and finish the rinse and spin cycle, then next cycle drum did not spin, hence the diagnostic tests
Es esta una buena pregunta?
Rep: 685.2mil
3.4mil
1.1mil
2.6mil
I would open the back and look for a loose wire or a burned spot.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 35
