Saltar al contenido principal

Modelo A1278 /Procesador 2.4 o 2.66 GHz Core 2 Duo de mediados de 2010

Preguntas 794 Ver todo

Installed second hard drive: now what?

I’ve just finished installing a second SSD in place of the optical drive on my Mid-2010 13” MacBook Pro (see Instalación del Disco Duro Dual del MacBook Pro 13" Unibody Mid 2010). I got it mounted and am seeing the additional 250GB of storage alongside the 120GB from the original SSD.

But now what? I guess I thought I was going to end up with a single volume where the computer would decide what data goes where, rather than needing to manually move files around. I found instructions on creating a RAID set, but I’m not sure if that would be what I’m looking for.

In the end, I’m hoping to have a single, shared volume for Mac to run on, plus a partition to run Windows through Boot Camp. Any thoughts? Should I just manually move some things to the second drive? What are others doing with their second drive?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

I think you have the wrong idea here on what a second SSD can offer. Here’s a good write up on what the different types of RAID Advantages and disadvantages of various RAID levels

RAID is mostly used in a mirror’ed setup on laptops (RAID 1) with HD’s as the drives are on the slower side. It speeds up the reading & writing of the data and if one drive fails the other drive will have a full image of the dead drive. With SSD’s this is less of a risk, in which case RAID 0 is used but here you need to exact same sized and ideally same I/O speed for the drives (basically two of the same drives)

You also have the option of setting up a Fusion Drive which is the combo of a SSD with an HDD and is then seen as a single drive (the size of what the HDD is) The SSD here is used to speed up access of the HD’s files.

Joining the drives into a logical drive in a bunch of drives (JBOD) is not smart in a laptop! As you then need to treat the collection as a single disk. This is often done in servers and the OS has to support it. Sorry to say MacOS does not support JBOD disks at this time.

I think the smarter way here is to just find a larger SSD drive and call it a day with the one drive.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

tom estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 95