Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2683 Ver todo

iPhone got a few drops of water in now lcd's wont work

my iphone 6s got a few drops of water in it , i disconnected battery and left it to dry for 3 days , switched back on , worked for a min , then lcd turned off , so i got a replacement screen tried it on another iphone 6s first , then plugged it in to the water damaged phone and no display , but the phone works , i restored it via itunes , etc can hear it ringing etc , just lcd will not work , maybe damage to motherboard , but where do i look , thanks for any help

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Shine a bright LED flashlight at the screen and boot it up to check for a bad backlight. It seems likely that your backlight fried. This is not a bad repair as far as board work goes, but not one to attempt unless you are well versed in micro soldering and have a good setup for it.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

shaz estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 31