Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Lanzado el procesador Intel Core i7 de cuatro núcleos el 24 de octubre de 2011 / 2.2, 2.4 o 2.5 GHz

Preguntas 435 Ver todo

MacBook Pro screen not powering on

My MacBook Pro powers on and charges and works perfectly except the screen does not power on. When I got the MacBook the display powered on and booted to the Apple Logo but then cut off.

If needed I will post pictures of the Logic Board.

UPDATE:

The keyboard backlight is working and i’m at the desktop, it looks like the screen backlight is the only problem because when I use the flashlight I can see the desktop.

I also have a second monitor connected to it and it is mirroring the desktop.

Update (08/05/2018)

Where is the LED driver on the logic board?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

Does an external display work? Give that a try.

- de

Agregar un comentario

2 Respuestas

Respuesta Más Útil

Sounds like your computer’s dedicated graphics have failed, an issue that is incredibly common with the 2011 15” and 17” MacBook Pros. There is no permanent fix for this besides getting a new computer, however there are some software solutions that can disable the dedicated graphics card, although they are not perfect. Apple had a repair program for these at one point, but that ended over a year ago. The most budget friendly reliable solution would be to get a 15” 2012 non retina MacBook Pro and stick your hard drive in it, or if you are up to it, sticking a 2012 motherboard in yours.

Fue útil esta respuesta?

Puntuación 2

Comentarios:

The keyboard backlight is working and I’m at the desktop, it looks like the screen backlight is the only problem because when I use the flashlight I can see the desktop.

I also have a second monitor connected to it and it is mirroring the desktop.

- de

Agregar un comentario

Joey, You may have a burnt fuse or the LED driver is gone. Both can be easily fixedly someone who has micro soldering skills and access to the needed parts.

Update (08/05/2018)

LP8550 U9701 which is a 25 bump micro chip

It’s located just below the fan

Block Image

You’ll need a proper rework station with a small nozzle to do this correctly.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Joey S estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 74