Rep: 93
3
12
iPhone 7 home button after lcd replacement, have damaged ic U10 by shorting the button. Looking under the microscope the home button, I notice that the integrated u10 was chipped, so I replace it with a new one. the button is now recognized but the click does not go, I changed 2 Ic but without solving. on the flat home button I have all the voltage drops. What could it be ? flex damaged?
Es esta una buena pregunta?
Rep: 221.4mil
15
289
807
It looks like the flex sustained some damage when you removed the IC. I would double check the condition of the flex and if you have another U10 IC, try that as well.
Fue útil esta respuesta?
I replaced u10 without solving. the flex visually does not seem damaged. and I have all the resistors on the fpc touch id connector
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 45
