Repara tus cosas Comunidad Tienda

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Opciones

Reachability works but Touch ID fails?

Hi,

I did a screen replacement on my iPhone 6. I bought it used for cheap and it looks like a third party had repaired it before. I changed the screen, and at first it told me that Touch ID cannot be set up.

I found out the home extension flex was torn so I replaced that.

Right now my home button works, and the reachability feature which used the sensor works. I am 100% positive this is my original home button, because the Touch ID “Add a Fingerprint” button is not disabled.

I’ve cleaned the connectors and brushed off any dust. There doesn’t seem to be damage to the actual flex cable.

What can I do from here? Thanks for any help.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Touch ID is correlated with your iPhone motherboard. It means that change of screen needs to be done with home button reassembly with oryginał Home button from your previous screen

Fue útil esta respuesta?

Sí No
Puntuación 0

3 comentarios:

He transferred the home button over. It allows him to use the reachibility mode, but not touch ID. It is not a problem about a non-original button

- de

Ouch my mistake.

Sometimes a full system recovery with DFU mode helps with sensor issues.

- de

Yes, it’s the original home button. A non-original home button would give me a prompt saying Touch ID cannot be activated. I will try a full restore.

- de

Agregar un comentario

Añadir tu respuesta

Eric Zhang estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 403