Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1687 / A1634. La Reparación de este dispositivo es similar a las generaciones anteriores, requiriendo destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16, 64 o 128 GB / Silver, Gold, Space Grey o Rose Gold.

Preguntas 1041 Ver todo

Stuck in Bootloop before and after replacing battery

With my 6s+ the battery went from 90% to 1% and restarted itself over and over, and then wouldn't charge. I thought the battery was to blame so I replaced it. It worked good for a day and then its back to 1% and restarting. Now, its stuck in a boot loop were it will go between quickly flashing the backlight and flashing apple logo. Any ideas? Ive tried to restore but it doesn't stay on long enough.

Also, when I first opened the phone 6 months after buying it on eBay, the battery connector cover was missing. I read online it could be the battery sensor. Any ideas?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

Try applying some pressure down on the connector while the phone turns on. If it works fine then you just need the metal bracket. If not then you might be missing some components near the battery connector which are commonly knocked off when preforming a battery replacement.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Thanks! Im going to have it replaced sometime this week.

- de

Agregar un comentario
Respuesta Más Útil

I think you need the battery connector cover, the battery ribbon cable plug may have a loose connection to the battery connector on the board requiring that metal cover that goes over the battery connector and charging port connector.

iFixit sells the battery connector bracket here:

iPhone 6s Plus Battery Connector Bracket

Here is a guide in case you need it:

Reemplazo de la batería del iPhone 6s Plus

Imagen de iPhone 6s Plus Battery Connector Bracket

Producto

iPhone 6s Plus Battery Connector Bracket

$6.99

Fue útil esta respuesta?

Puntuación 2

2 comentarios:

Would this really solve my problem? Ive snapped both connects in tight and it still wont work.

- de

If you have tried turning it on while applying pressure to the connection then it won't work.

- de

Agregar un comentario

Añadir tu respuesta

Michael N estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 194