Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2682 Ver todo

Proximity and ambient light sensor

Hi everyone, I have a problem with the proximity sensor and the ambient light sensor of my white iphone 6s. I replaced the front panel with a non-OEM part. at first the proximity sensor did not work. with an indelible marker I obscured the sensor housing and worked. if I make a call and then put the phone to my ear, the display goes off. if I receive a call and the phone is on the table, when I put it to the ear the display goes off. if instead I receive a call and take the phone out of my pocket and put it to my ear, the display will not turn off. I did a test: if I receive a call and I cover the proximity sensor before answering, the display will not turn off. if, however, I cover the ambient light sensor before answering, the display on call will turn off. if I receive a call and the phone is in my pocket, I answer, press the home button and then return to the call, the display if I put the phone to my ear, goes off. what could be the defect? thank you all

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

Did the replacement screen come with the Front Camera Sensor flex pre-installed? If so, those usually contain a lower quality aftermarket flex and can be the root of your issue. In that case, I would recommend you transfer over the original flex from your damaged screen, following this guide.

If you did migrate your original flex, then tale a closer look at it to see if the flex was damaged, such as a tear or broken connector pin).

Update (05/24/2018)

Hi @refectio

the screen arrived without flex. the sensors are original apple. in these two days I disassembled and reassembled the flex several times, placing the sensors in the correct position. The sensors are clean

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Hi, some news: if I leave the phone with the display facing down and someone calls me, if I put the phone to the ear, the display doesn't turn off. But if I put the proximity sensor on the surface where the phone was first, the display goes off.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Vito Gravante estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 2,728