Saltar al contenido principal

La PSP 300x se lanzó en EE. UU. el 15 de octubre de 2008. La reparación de este dispositivo solo requiere herramientas comunes.

Preguntas 34 Ver todo

What screw do I need to remove the top screw?

So I bought a PSP 3000 from Japan and I am trying to get the front panel off.

5/7 screws are standard phillip 000. The other 2 are some other type.

Block Image

Block Image

Photo isn't clear but I can see 6 vertices that form a star shape. The screw size is very small. A lot smaller than phillip 000. Even my flathead 1.5 won't fit.

Can anyone please tell me if they know this screw type?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Respuesta Más Útil

It is called a Torx screw. They are usually labelled T5 for a size 5 Torx, or TR10 for a size 10 Torx with a indent in the middle for special security screws.

It is found in many consumer products, especially laptops, where they do not want you to remove components or casings. From the looks of it, it is probably between a size T5 and a T3.

I have since sold my Japanese PSP due to financial issues, so I can no longer tell you the exact size. But iFixIt does sell a kit with the available sizes found here: Mako Driver Kit - 64 Precision Bits

Imagen de Mako Driver Kit - 64 Precision Bits


Mako Driver Kit - 64 Precision Bits


Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

I have the ifixit kit with the t4 and t5 bits and both are too big. So am guessing it's a t3.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Anthony Siharath estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 28

Ultimos 30 días: 79

Todo El Tiempo: 2,617