Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 847 Ver todo

iPhone 7 Plus problems after battery replacement

After iPhone 7 Plus battery replacement, I am having trouble with the home button (and/or Taptic Engine), speakers, volume buttons, and microphone. These are non-functional. I have checked the connectors and reseated the Taptic Engine without improvement. All other functions appear intact with the use of the on-screen home button. However, the inability to communicate by phone (the calls still go through) leaves me without the primary function, not to mention I don’t want to go back to a world without Touch ID! I’m worried that I re-connected the battery out of sequence and damaged some of hardware.

Would this make sense given the constellation of problems?

Are there one or two hardware components that could potentially fix this problem?

Notably, the proprietary home button prevents third parties from addressing this and Apple will not accept iPhones for repair if ifixit (or other third party vendor) hardware is evident. Potential catch 22 if I cannot address this.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Kits de Reparación de Android

A new screen or battery is one kit away.

Comprar Ahora

Kits de Reparación de Android

A new screen or battery is one kit away.

Comprar Ahora

1 Respuesta

Solución Elegida

Other than screen or battery repairs, Apple doesn't fix phones...they just replace them and charge you an OOW fee.

I would go back though this guide to double check your steps, you may have damaged some flexes dislodged some components on the logic board. With so many different problems, it's hard to say from this vantage point.

Normally, you disconnect the battery first and connect it last. Any errors usually cause backlight issues so I don't believe your various issues were caused by the battery. Did you pry the battery out or did the pull tabs work well?

Fue útil esta respuesta?

Calificación 1


Hi Minho, thanks for your response. That’s interesting and reassuring to hear about the backlight issues. The adhesive tab removal went smoothly. I’m stumped after recounting the steps, so I’ll probably need someone to take a look.


Agregar un comentario

Añadir tu respuesta

Brian Harry estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 21

Últimos 30 Días: 63

Todo El Tiempo: 1,317