Saltar al contenido principal

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

Preguntas 185 Ver todo

Bottom touch screen not working (New)


I just replaced my battery and screen on my Ipad and the bottom 1.5inches is not working. I bought the parts from ifixit. I have been a careful as I can on the flat connectors and screen/digitizer as I can and 90% positive nothing is damaged. Is it a part issue or...?


Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

The ribbon cable probably got crushed / damaged when fitting the digitizer onto the frame.

The cable at the bottom right must be folded inwards right before closing the bottom right hand side of the digitizer or else the ribbon cable can be crushed between the glass and the iPad frame housing.

But it could also be a defective digitizer, but personally I think there rarely are faulty ones out there for iPad 4 and older.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Charles Blondeau estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 17