Saltar al contenido principal

Desktops developed by eMachines. eMachines has since been discontinued by the Acer Group.

Preguntas 58 Ver todo

eMachines e625 kawg0 model won't turn on

Hello, I'm beginner specially in hardware , i wish that you can help me,

i downloaded the schematic and i made some checks : i tested the power cable it work , and continuity in power button , and now i don't now what i should test to find the problem because i can't understand the schematic

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

2 Respuestas

You may have a dead CMOS battery. I had an eMachines computer that appeared to be dead; I replaced the CMOS battery, and the computer came back to life.

Also, check the power cable that plugs into the motherboard. Make sure that each wire has the correct voltage. You likely have an ATX power supply (most computers do). Go to the following web site to see some very good diagrams which show the correct voltages for the main power connector (the one that plugs into the motherboard), as well as for the Molex and SATA power connectors:

http://www.smpspowersupply.com/connector...

If all of the voltages show to be correct when you test them, then replace your CMOS battery.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

I tested the power cable , the cmos battery and also the power button all work, i want to continue tests but i can't understand the schematic

Schematic:https://drive.google.com/open?id=1qq1xow...

Block Image

Block Image

Block Image

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

sat-abd estará eternamente agradecido.
Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 14

Todo El Tiempo: 264