Repara tus cosas Comunidad Tienda

Guías de reparación y soporte para una variedad de joyas.

Preguntas 3 Ver todo

Opciones

very hard setting, very clear epoxy glue

Hi all. Can anyone recommend an epoxy glue that I can repair a cracked and chipped agate stone that is set into an expensive ring. I really dont want to have to replace the stone as its an irregular shape so fitting a new stone to the ring will be too hard. I want to try to mask the cracks and missing spaces with a tough but clear glue that wont yellow with age. I anticipate mixing it with acetone to give it additional flow. I found something very expensive stuff but before i go that route Id appreciate seeing if anyone has any recommendations. Araldite was too opaque and yellows I think. Many thanks

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

had a look and can find this but not sure if its what your looking for or not https://www.amazon.com/Epoxy-330-Water-C...

Fue útil esta respuesta?

Sí No
Puntuación 1

4 comentarios:

Thanks so much for looking. I'm in the uk and they dont ship to uk. will look and see if I can find it on the uk amazon

- de

what about car window chip epoxy

- de

good idea. I wonder if I can get it in small quantities though. Its the shipping that seems to send the cost up. I found the 303 glue but even on uk amazon the postage is 3 times the price of the glue! Thanks for your input

- de

Agregar un comentario

Opciones

Hi I have great success with UV resin it uses ultraviolet light from a UV torch or even the sun, you can get it on Amazon, hope this helps.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Cecilia Leete estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 7

Todo El Tiempo: 481