The Kenmore 90 Series is a washing machine manufactured by Kenmore.

Preguntas 218 Ver todo

Washer doesn't agitate, but fills & spins.

My washer fills according to the set water level. Not agitate & after a while, drains & spins. This cycle goes on couple of times until the dial comes to the " off" position. I hear the sound of the timer and a click time to time. No humming in the motor in between. Can anyone help me to identify the problem. Thank you.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0

Comentarios:

Thank you so much for your advice. I disassembled agitator and that gear case. All the parts looked fairly good. So I reassembled and add new gearcase oil. My washer started working again.

por

Great! Not sure how much wear it got. They usually don't need added oil, keep an eye on it, watch for oil on clothes. The agitator kits are fairly inexpensive.

por

Agregar un comentario
Reparte el espíritu de reparación esta Navidad
Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
Reparte el espíritu de reparación esta Navidad
Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12

1 Respuesta

Solución Elegida

Cause 1

Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.

Cause 2

Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.

Cause 3

Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.

Fue útil esta respuesta?

Calificación 2
Agregar un comentario

Añadir tu respuesta

Udith estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 11

Últimos 7 Días: 65

Últimos 30 Días: 369

Todo El Tiempo: 1,413