Saltar al contenido principal

Guías de reparación, desmontaje y soporte para lavavajillas.

Preguntas 700 Ver todo

Whirlpool dishwasher won't start, model WDT710PAYM

When pressing the start button the Sani Rinse and Overnight buttons light up and there is a beep for a second and then the lights go off.

Press other buttons just gives a beep and no light.

I can't find any answers on how to fix it, please help.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

Cause 1

Thermal Fuse

The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it.

Cause 2

Door Switch

The door switch prevents the dishwasher from running while the door is open. If the door switch is defective, the switch will prevent the dishwasher from running even when the door is closed. To determine if the door switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it.

Cause 3

Door Latch

The door latch ensures that the dishwasher door latches shut. If the door does not latch properly, the door switch might prevent the dishwasher from running. If the door latch is broken, replace it.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Tim W estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 1,773