Saltar al contenido principal

iPhone de 4 pulgadas lanzado en marzo de 2016 con especificaciones de hardware similares al 6s. Disponible en Plata, Gris espacial, Oro u Oro rosa con opciones de almacenamiento de 16/64 GB. Modelos A1662 y A1723.

Preguntas 1046 Ver todo

Phone battery drains after spark in replacement.

Hey guys,

So a few weeks ago, I sent my phone off to a 3rd party repair shop due to error 4013. They fixed it and sent it back. However, their battery was not holding charge. I replaced the battery myself, and it went a huge success. Except one thing..

For some reason, the phone charges fine, but when in use gets hot near the bottom, and will be flat in about 1hr. During the repair, I used a metal spudger instead, and caused a spark when disconnecting the battery to the logic board.

I have tried a reset through DFU mode with no change.

Any ideas? Do you think that it could be a U2 chip failure?

Thanks

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Probably one or a combination of a few things:

- Shorted small SMD components near battery connector

- Bad tristar chip.

Anyway both will need micro-soldering to fix.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Alexander Thomas estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 154