Saltar al contenido principal

Lanzado en noviembre de 2016, el PS4 Pro cuenta con hardware actualizado para juegos de 4K y streaming de vídeo.

Preguntas 382 Ver todo

Error code SU-39176-6 after replace HDD

Hi,

I have a problem with my PS4 PRO. I bought new HDD Seagate Barracuda (1TB), download last firmware (954 MB) to my flash USB 3.0 (formated fat32) to folder PS4 - UPDATE - PS4UPDATE.PUP. According step by step processing I get message Error SU-39176-6.

I’ve tried change 4 USB flash drives (USB 2.0 and 3.0), trying download firmware from Safari, Chrome , etc.. the same result.

I have no idea if I have to formated new HDD? FAt32?

I’m frustrated. I’m realy appreciate your help!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
1 comentario

Have you tried taking the hard drive out and putting it back it. It could be the hard drive either isn't in all the way, or not in completely.

- de

Agregar un comentario

2 Respuestas

Respuesta Más Útil

Usually HDD do not need to be formatted, PS4 will erase the drive completely in this process, so HDD file system or even partition table is not relevant.

See if the problem persists with your original HDD, also check for Sony support for this error because this error code is very rare and not even found on PS4 dev wiki.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Probbably problem with your hdd. Change HDD!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

tomas mora estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 13

Todo El Tiempo: 2,264