Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

iPhone screen not working

I replaced iPhone 6 screen a few days ago , as I have done it many times before , there was no problem until the battery had to be replaced today , as I put the screen back on I notice it has lines going up and down the phone and looks as though it had been dropped even though I didn’t drop it and I was very careful taking the screen off and putting it back on , any reasons why ? Is it the screen or the motorboard itself , thank you

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

1 Respuesta

Solución Elegida

Either it's the flex cable on the screen gone bad or not connected properly to the logic board.

If the screen connectors on the logic board seem fine and you already tried replugging the screen then the screen is faulty.

Fue útil esta respuesta?

Puntuación 3

3 comentarios:

Thank you so much

- de

One of the connectors don’t click like the rest , does this matter?

- de

The two horizontal ones from the screen should click in normally.

There is another cable that clicks in furthest away from the rear camera and that is for the front camera you don't need to worry about that one.

The one cable that is horizontal and smallest is for the LCD screen display.

- de

Agregar un comentario

Añadir tu respuesta

Mary sue estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 42