Saltar al contenido principal

Lanzado en Septiembre 16, 2016. Modelos 1660, 1778. Disponible en GSM o CDMA / 32, 128, o 256 GB / Oro Rosa, Oro, Plata, Negro Mate y Negro Brillante.

Preguntas 751 Ver todo

Logic board get hot after I replaced the screen

Hey guys,

I have this issue today after I replace an iPhone 7 plus screen. Is not the first time for replacing the screen for the iPhone 7 Plus. After I replaced the screen is works fine but freeze on Apple logo and the logic board get really hot and is not booting to the system!

I tried every time and disconnected from the battery cable to turn off.

Any help guys?

Thank you

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 2
Agregar un comentario

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

3 Respuestas

Respuesta Más Útil

It’s the display. iPhone 7 and up don’t have a physical home button so in the instance that you connect the flex cable that runs the home button you can run into this issue. Doesn’t happen all the time but with some after market displays the button isn’t coded properly. Meaning your phone just can’t process the fact that you have a home button and the software never loads.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Have you tried reconnecting the broken screen?

Do you have another screen to test it with?

Fue útil esta respuesta?

Calificación 0

Comentarios:

Yes sir I connected the old screen but it got the same issue. "stuck in Apple logo and the logic board get really hot.

When I see the logic board get really really hot I disconnect the battery cable, because I don't want to burn the phone. I'm trying to be really careful.

por

When you replaced the screen originally, did you unplug the battery? I sounds like something is fried.

por

Yes I unplug the battery after I replace it! but during the replacement I didn't turn off the phone as usual!

right now if i connect the screen and turn on the phone it will work but it will stuck on Apple logo, and Logic board get hot!

por

try to connect the cable to itune and do DFU reset the phone and see if the phone reset it itself

por

what about the heat on logic board! do you think i don't need to worry about it?

Is the heat from the logic bard not gonna cause any problem to the phone?

por

Mostrar 2 comentarios más

Agregar un comentario

disconnect all the ribbons and just plug in the lcd connector and the battery and see if this lets the phone boot to the main screen, if not and the phone is still overheating try and locate where most of the heat is coming from

Fue útil esta respuesta?

Calificación 0

Comentarios:

Yes sir I already did and still get hot

the heat came from the Logic board

as you can see in the picture I marked in the red!

all the heat come from here when i boot up the phone, and the screen stuck on Apple logo and don't let me get in inside the iOS!

Picture:

http://fowzy.net/oboxQC5XMlghqA6I.jpeg

por

if you keep the lcd disconnected and power on does it still get hot or just when the screen is plugged in

por

Let me check @djdannyrock give me a moment please

por

I’m having this same issue please help, yes if I unplug the lcd ribbon and leave battery ribbon connected it doesn’t get hot like it would with the lcd ribbon connected

por

Agregar un comentario

Añadir tu respuesta

Fowzy Alsaud estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 31

Últimos 30 Días: 118

Todo El Tiempo: 2,232